|
|
Parts
Feb 22, 2017 11:07:43 GMT -5
via mobile
Post by Brandon Miller on Feb 22, 2017 11:07:43 GMT -5
So what are some detail parts y'all might like to see? I may be doing some 3d design for an aftermarket vendor so he can cast new products. What's some stuff wanted?
|
|
|
|
Parts
Feb 22, 2017 11:47:41 GMT -5
via mobile
Post by jtmurp02 on Feb 22, 2017 11:47:41 GMT -5
I think I'd talked about this with Stoney a while back. Maybe roof cameras. Possible to do accurate spindle/rear-end caps, like you have on some of your builds? What about a thin, accurate window net? I think Lionel's look awful and I suck at making them haha. Just some thoughts.
|
|
|
|
Post by hotwheels on Feb 22, 2017 12:52:19 GMT -5
 Update for the Ford? Grill and those corner extensions. |
|
|
|
Parts
Feb 22, 2017 13:14:53 GMT -5
via mobile
Post by brianp on Feb 22, 2017 13:14:53 GMT -5
Update for the Ford? Grill and those corner extensions. I'd be in for some of those!! |
|
|
|
Parts
Feb 22, 2017 15:23:05 GMT -5
via mobile
Post by Reyst on Feb 22, 2017 15:23:05 GMT -5
Maybe the correct Carbon Fiber seat or dash to fit the revell gen 6 kits?
|
|
|
|
Parts
Feb 22, 2017 15:48:39 GMT -5
via mobile
Post by Brandon Miller on Feb 22, 2017 15:48:39 GMT -5
And I will say this is a great aftermarket dealer with great products. I've used a bunch of his stuff and just ordered some morr last night.
|
|
danjc
Young Gun
Posts: 87 
|
Parts
Feb 22, 2017 16:19:41 GMT -5
Post by danjc on Feb 22, 2017 16:19:41 GMT -5
I too would like to see updates for the Ford with the grill and corner extensions. Maybe a better dash then what's in the Revell kit?
|
|
|
|
Parts
Feb 22, 2017 21:09:13 GMT -5
Post by tireman33 on Feb 22, 2017 21:09:13 GMT -5
Yes, in my order I would like #1 Revell Ford and Chevy grill insert. #2 Seat. #3. Dash. #4 Short, Low Downforce Spoiler from 2016 and now 2017 which is even shorter I know I can sand it down, but why when I can spend money!!  |
|
|
|
Parts
Feb 22, 2017 22:14:05 GMT -5
via mobile
Post by Brandon Miller on Feb 22, 2017 22:14:05 GMT -5
Yes, in my order I would like #1 Revell Ford and Chevy grill insert. #2 Seat. #3. Dash. #4 Short, Low Downforce Spoiler from 2016 and now 2017 which is even shorter I know I can sand it down, but why when I can spend money!! What insert for the Chevy? |
|
|
|
Parts
Feb 23, 2017 7:55:08 GMT -5
Post by tireman33 on Feb 23, 2017 7:55:08 GMT -5
The Chevy grill has a 'step' 'hole' whatever you want to call it so the large lower grill decal does not fit flush. What I do now is paint the grill black, cut off the chrome grill surround and apply just the surround.
Way too much work for me, LOL
|
|
|
|
Parts
Feb 23, 2017 12:41:12 GMT -5
via mobile
Post by Stoney on Feb 23, 2017 12:41:12 GMT -5
The Chevy grill has a 'step' 'hole' whatever you want to call it so the large lower grill decal does not fit flush. What I do now is paint the grill black, cut off the chrome grill surround and apply just the surround. Way too much work for me, LOL I just fill in that lower grille. Really don't need an insert for it. |
|
|
|
Parts
Feb 23, 2017 16:01:46 GMT -5
Post by tireman33 on Feb 23, 2017 16:01:46 GMT -5
so I'm lazy, and then I know I would have to fill around the insert. I hate using filler  Never can get a smooth transition from filler to plastic. |
|
indy
Rookie
Posts: 42
|
Parts
Feb 24, 2017 14:31:24 GMT -5
Post by indy on Feb 24, 2017 14:31:24 GMT -5
I have a nice EFI unit that I 3D print. Tiny but not cheap to print with good detail. Top left is unpainted unit on Gen6 diecast, top right is painted unit on Revell Fusion dash.  Working on the relay box to go with it, just need a bit of motivation to get back to it. I have a Penske dash about half drawn which would cover all of their gauged cars from 2012 to 2015. Gauge clusters vary in about three different formats from my references. Brandon had mentioned a Fusion grill about a year ago and I thought that was dead so I was wanting to work on that next. Not looking to compete with Brandon & the vendor though. Jordan |
|
|
|
Parts
Feb 24, 2017 17:25:40 GMT -5
Post by Stoney on Feb 24, 2017 17:25:40 GMT -5
I have a 3D printer (still need to do some dialing in on it though) i could try printing some stuff to see how it comes out if someone wants to design stuff.
|
|
|
|
Parts
Feb 25, 2017 8:56:28 GMT -5
Post by tireman33 on Feb 25, 2017 8:56:28 GMT -5
Jordon, I am up to buying 10 of the EFI boxes and relay boxes. Is that motivation enough? If you don't include the penny, that would cut your cost. |
|
