|
|
Post by DonCarp on Jun 4, 2015 9:22:22 GMT -5
Do you guys sand your Die-cast before you primer them? and if so what grade of sandpaper should I use, thanks everyone.
|
|
|
|
Post by Brandon Miller on Jun 4, 2015 12:01:22 GMT -5
Strip it to bare metal, wash, and prime.
|
|
|
|
Post by Stoney on Jun 4, 2015 19:05:21 GMT -5
Just as Brandon said. I use a self-etching primer, but that is just personal preference.
|
|
|
|
Post by DonCarp on Jun 4, 2015 19:17:39 GMT -5
okay so after I strip it down to the bare metal just wash it and there is no need to sand the metal.
|
|
|
|
Post by Brandon Miller on Jun 4, 2015 21:11:19 GMT -5
Nope
|
|
|
|
Post by gordz on Jun 8, 2015 21:36:14 GMT -5
What I do before priming the bare metal is give the diecast a quick once over with fine steel wool. Then after washing it off and drying, I rub a tack cloth over the car to make sure no oils or dust ruin the primer adhering to the bare metal. Hope this helps.
|
|
