|
|
Post by BadDad5 on Sept 20, 2018 18:50:48 GMT -5
I forget..which is the one you apply first to get the decal to squish down to say, roof flap lines?
|
|
|
|
Post by Stoney on Sept 20, 2018 19:11:23 GMT -5
No idea. I stick with Walther's Solvaset.
|
|
|
|
Post by pdr on Sept 20, 2018 20:18:38 GMT -5
No idea. I stick with Walther's Solvaset. Same here. |
|
|
|
Post by BadDad5 on Sept 20, 2018 20:23:52 GMT -5
I have some of that too...so apply before applying or after?
|
|
|
|
Post by BadDad5 on Sept 20, 2018 20:25:43 GMT -5
Reason I posted is because the last car I did was a 2003 diecast. I used some slixx decals..they were fine except for having air under the roof flap line.
|
|
|
|
Post by snowhawk on Sept 21, 2018 2:02:18 GMT -5
No idea. I stick with Walther's Solvaset. Same here, decals sat down great. |
|
|
|
Post by pdr on Sept 21, 2018 15:56:34 GMT -5
I have some of that too...so apply before applying or after? I put it down BEFORE for complex curves/flaps/seams. |
|
|
|
Post by daylon on Sept 21, 2018 22:02:58 GMT -5
The red always seem to work the best for me never had good results with the blue but its your call
|
|
|
|
Post by raptor on Sept 24, 2018 9:12:30 GMT -5
You put down the Micro-"Set" first,on the surface you are getting ready to decal. Then apply decal & apply Micro-"Sol" on top of decal. It will wrinkle the decal but leave it alone & will dry snug & flat.
|
|
|
|
Post by Pheedens I am on Sept 25, 2018 0:00:17 GMT -5
You put down the Micro-"Set" first,on the surface you are getting ready to decal. Then apply decal & apply Micro-"Sol" on top of decal. It will wrinkle the decal but leave it alone & will dry snug & flat. What he said.
My personal favorite is Mr Mark Softener, OMG does it work, so good that I have ruined a handful decals, but seriously, It works great.
|
|
|
|
Post by BadDad5 on Sept 25, 2018 16:41:49 GMT -5
Mr. Mark Softener? never heard of it can you tell me about it?
Oh, I get it now..Micro Set (sets the decals) and Micro Sol is the solvent like Wathers....to make em snug up
|
|
|
|
Post by Pheedens I am on Sept 25, 2018 16:45:25 GMT -5
Mr. Mark Softener? never heard of it can you tell me about it? Oh, I get it now..Micro Set (sets the decals) and Micro Sol is the solvent like Wathers....to make em snug up Its very strong .
|
|
|
|
Post by BadDad5 on Oct 3, 2018 16:44:04 GMT -5
Very interesting Phee...Thanks for the heads up!
|
|
|
|
Post by Pheedens I am on Oct 5, 2018 0:46:11 GMT -5
Very interesting Phee...Thanks for the heads up! No problem BD , it is in my opinion one of the best decal setting solutions on the market, I love it, because it works so good, the window you have to make any last minute corrections is very small, Ive ruined a number of decals because I was being all handsy and wouldnt leave it alone.
If you are interested in trying, I am going to provide a link for the ebay seller I get mine from , get the two pack, just dont ask what the blue one is used for, I thinks like a glue more than a setting solution.
Ok, the seller I use is sold out right now I believe
Here is a Ebay search for it.
I actually filmed a setting solution comparison video using the NASCAR tire decals, but it didnt come out very good so I binned it, I compared, Mr Hobby's, Tamiya's ( normal and strong) and Micro Set/SOl
|
|
|
|
Post by hotwheels on Oct 5, 2018 11:51:01 GMT -5
Very interesting Phee...Thanks for the heads up! No problem BD , it is in my opinion one of the best decal setting solutions on the market, I love it, because it works so good, the window you have to make any last minute corrections is very small, Ive ruined a number of decals because I was being all handsy and wouldnt leave it alone.
If you are interested in trying, I am going to provide a link for the ebay seller I get mine from , get the two pack, just dont ask what the blue one is used for, I thinks like a glue more than a setting solution.
Ok, the seller I use is sold out right now I believe
Here is a Ebay search for it.
I actually filmed a setting solution comparison video using the NASCAR tire decals, but it didnt come out very good so I binned it, I compared, Mr Hobby's, Tamiya's ( normal and strong) and Micro Set/SOl
What is the difference with Mr Mark "softener" and Mr Mark "setter"... do you use both? |
|
