|
|
Post by Brandon Miller on Feb 27, 2018 18:16:14 GMT -5
Keep bringing on the suggestions. Gives me stuff to work on and add.
|
|
|
|
Post by Brandon Miller on Feb 28, 2018 11:20:57 GMT -5
|
|
|
|
Post by Brandon Miller on Feb 28, 2018 17:05:34 GMT -5
Would anyone be interested in these front spring cups and A Arm mounting pieces?   |
|
|
|
Post by jpaul7 on Mar 1, 2018 19:26:41 GMT -5
I bought a set of the hubs and brakes today. I will let you know when I use them
|
|
|
|
Post by jhedir6 on Mar 5, 2018 10:57:04 GMT -5
Ok Brandon, I got a couple more...
I'm building a NASCAR chassis now and what I'd like to see..1 correct dashtop to replace the Revell glue kits (new ones) cause I dont think they're as accurate as they could have been.
NASCAR seat. I think the seats in the last gen of glue kits look more accurate than the newer ones. But a 3D printed one might be even better.
Modern helmets to add to cars for display, or to replace on the kit drivers, with the correct hose mount on top and radio hookups on the sides.
Window braces...not sure how they'd work out, might be too fragile in scale.
Roof accessories, camera (which you have) antennas, rear cams, in car cams, a set that has enough of each to do 2-4 cars, pending on pricing.
Front splitters, Ford, Chevy, Toyota,
Rear spoilers for the different tracks. High/low down force ones.
Hood hinges and safety straps/cables
|
|
|
|
Post by Brandon Miller on Mar 5, 2018 12:49:53 GMT -5
Ok Brandon, I got a couple more... I'm building a NASCAR chassis now and what I'd like to see..1 correct dashtop to replace the Revell glue kits (new ones) cause I dont think they're as accurate as they could have been. NASCAR seat. I think the seats in the last gen of glue kits look more accurate than the newer ones. But a 3D printed one might be even better. Modern helmets to add to cars for display, or to replace on the kit drivers, with the correct hose mount on top and radio hookups on the sides. Window braces...not sure how they'd work out, might be too fragile in scale. Roof accessories, camera (which you have) antennas, rear cams, in car cams, a set that has enough of each to do 2-4 cars, pending on pricing. Front splitters, Ford, Chevy, Toyota, Rear spoilers for the different tracks. High/low down force ones. Hood hinges and safety straps/cables Good suggestions. I can tell you some of those would be unable to do due to the thickness requirement (window braces comes to mind). I'll see what I can come up with. |
|
|
|
Post by Reyst on Mar 6, 2018 7:24:52 GMT -5
Ok Brandon, I got a couple more... I'm building a NASCAR chassis now and what I'd like to see..1 correct dashtop to replace the Revell glue kits (new ones) cause I dont think they're as accurate as they could have been. NASCAR seat. I think the seats in the last gen of glue kits look more accurate than the newer ones. But a 3D printed one might be even better. Modern helmets to add to cars for display, or to replace on the kit drivers, with the correct hose mount on top and radio hookups on the sides. Window braces...not sure how they'd work out, might be too fragile in scale. Roof accessories, camera (which you have) antennas, rear cams, in car cams, a set that has enough of each to do 2-4 cars, pending on pricing. Front splitters, Ford, Chevy, Toyota, Rear spoilers for the different tracks. High/low down force ones. Hood hinges and safety straps/cables I would Second most of these items |
|
|
|
Post by tireman33 on Mar 11, 2018 21:29:17 GMT -5
Just received the race hubs. WOW are they great looking. Going to be a few weeks before I can get to mess with them due to that 4 letter word, WORK.....
|
|
|
|
Post by Brandon Miller on Mar 15, 2018 15:25:06 GMT -5
High detail Aero wheels have now been added. Aero Wheels |
|
|
|
Post by 1320wayne on Mar 16, 2018 9:00:24 GMT -5
Just picked up some calipers and roof cameras. Look forward to more items in the future. Everything looks great so far. I would love a modern seat and rear camera as mentioned above.
|
|
|
|
Post by Brandon Miller on Mar 16, 2018 10:05:32 GMT -5
I had to pull the wheels for the time being. Shapeways alerted me to an issue last night. I will work on getting that fixed. But for now, I've uploaded a new fire suppression bottle. Fire Suppression Bottle |
|
|
|
Post by jhedir6 on Mar 16, 2018 12:37:57 GMT -5
Wheels look great Brandon. I'll definitely be ordering some parts. Just holding out to see what else you have in the pipe. Looks like lots of nice items for a super detailed build. Any rotors on the horizon to go with the wheels and calipers?
|
|
|
|
Post by Brandon Miller on Mar 16, 2018 14:15:49 GMT -5
Wheels look great Brandon. I'll definitely be ordering some parts. Just holding out to see what else you have in the pipe. Looks like lots of nice items for a super detailed build. Any rotors on the horizon to go with the wheels and calipers? Yes probably so on the rotors |
|
|
|
Post by drjekyll76 on Mar 20, 2018 11:37:17 GMT -5
Those are some very nice pieces, I may have to get some.
|
|
|
|
Post by Brandon Miller on Mar 26, 2018 18:48:34 GMT -5
Chris Kauffman was kind enough to send me a crap ton of Nascar resin detail items that are no longer in production. I will be reproducing these in 3d for printing through Shapeways.
|
|
